731914
9
Zoom out
Zoom in
Previous page
1/20
Next page
EN
IDENTIFICATION OF MAIN COMPONENTS / SYMBOLS 3
[1]
Notice:
The vibration value indicated was determined with a standardized tool and can be used to make comparisons with other electric equipment
as well as temporary estimates of the load through the vibrations.
WARNING!
The vibration value may vary according to the usage of the machine and its tted equipment, and be higher than the one indicated. Safety
measures must be established to protect the user and must be based on the load estimate generated by the vibrations in real usage conditions.
In this regard, all the operational cycle phases must be taken into consideration, such as switching o or idle running.
The noise level may vary according to machine usage if working or running idle.
Maximum noise and vibration levels [1]
T 1.0 EJ
Sound pressure level
– Measurement uncertainty
dB(A)
dB(A)
79.3
3
Measured acoustic power level
– Measurement uncertainty
dB(A)
dB(A)
88,2
3
Guaranteed sound power level
dB(A) 96
Vibration level
– Measurement uncertainty
m/s
2
m/s
2
2.5
1.5
TECHNICAL DATA
T 1.0 EJ
Power supply voltage
V~ 230
Power supply frequency
Hz 50
Engine Power
W 1000
Cutting width
cm 37
Mass
kg 4,70
No-load Speed
min
-1
7000
Maximum engine and tool rotation speed
r.p.m 7000
2. SYMBOLS
1) Warning! Danger. The failure to use this ma-chine cor-
rectly can be hazardous for oneself andothers.
2) Read the instruction manual before
using themachine.
3) If you are using the machine every day
in normal conditions, you can be ex-
posed to a noise level of 85 dB(A) or
higher. Wear earmus or ear-plugs, eye
protection and a protective helmet.
4) Danger of ying objects! Keep any pe-
ople orpets at least 15 m away when
using the machine!
5) Disconnect the plug from the mains be-
fore commencing maintenance work or
if the power cord is damaged.
6) Do not leave the machine in the rain (or
in damp conditions).
7) Only one cutting line head can be used
on thismachine.
8) Do not use pointed, rigid or metal bla-
des orcircular saw blades.
9) Keep bystanders away.
10) Cutting device rotation direction.
11) Acoustic output level LWA.
2
1 2 3 4
5 6 7
8
9 10 11
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alpina ABR 1.0 EJ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alpina ABR 1.0 EJ in the language / languages: All languages as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info