702261
24
Zoom out
Zoom in
Previous page
1/37
Next page
Installateurs-handleiding CP-500 V4.0 Datum: 1 juli 1997 Blz. 24
6.4 Protocols
Er kan gekozen worden uit diverse protocols. Bij elk telefoonnummer dient het bijbehorende protocol gepro-
grammeerd te worden. Dit gaat op de volgende manier (voorbeeld voor protocol behorende bij het eerste
telefoonnummer):
- Druk op de toets <Funktie>
- Druk op de toetsen <6>, <9> en <0>
- Druk op de toets <#>
Op het display verschijnt:
Protoc. 12345678
Nr. 1 00000000
U kunt nu een protocol uit de hierop volgende lijst selecteren door de betreffende bitposities in te stellen.
1 2 3 4 5 6 7 8 (bitpositie)
Protocol
SIA-HS (high security) 0 0 0 0 0 0 0 0
niet gebruikt 0 0 0 0 0 0 0 1
niet gebruikt 0 0 0 0 0 0 1 0
Franklin 4+2 0 0 0 0 0 0 1 1
Scancom 1400-1600 puls 3+1 0 0 0 0 0 1 0 0
Privé protocol 0 0 0 0 0 1 0 1
niet gebruikt 0 0 0 0 0 1 1 0
niet gebruikt 0 0 0 0 0 1 1 1
niet gebruikt 0 0 0 0 1 0 0 0
Sematone 0 0 0 0 1 0 0 1
Semadigit 0 0 0 0 1 0 1 0
- Druk daarna op de toets <#>
- Het protocol is geprogrammeerd.
SIA-HS (High Security): dit protocol is de meest geavanceerde mogelijkheid van doormelding in de CP-500. Alle
mogelijke informatie wordt hierbij doorgemeld naar de P.A.C. Het aansluitnummer wordt 4-cijferig geprogram-
meerd. Het is niet nodig om kiezerkanalen te programmeren (zie 7.7), de kiezer stelt de meldingen automatisch
samen.
FRANKLIN 4+2: dit pulse-count protocol met go-ahead en kiss-off (handshake) van 2300Hz werkt op een
snelheid van 20 pps. Per gebeurtenis moet een kiezercode geprogrammeerd worden (zie 7.7). De doormelding
bestaat uit een 4-cijferig aansluitnummer en 2 cijfers informatie. Het eerste cijfer is het geprogrammeerde
kiezerkanaal of kiezercode (zie 7.7) Het tweede cijfer is de toegevoegde informatie. Deze informatie voegt de
CP-500 zelf toe.
Voorbeeld Franklin 4+2: is de inschakeling voor sektie A (adres 996) geprogrammeerd als code 7, dan wordt bij
inschakeling van sektie A door gebruiker met codenummer (codeplaats) 5 de melding "1 2 3 4 7 5" verzonden.
Hierbij is 1234 het aansluitnummer, 7 de geprogrammeerde code en 5 het nummer van de gebruikte code
(codeplaats, zie gebruikershandleiding). Alle codeplaatsen hoger dan 15 worden als 15 (hexadecimaal F)
doorgemeld. Met het Franklin protocol kan dus op de P.A.C. het verschil tussen schakelingen van gebruikers
met codeplaatsen 1 t/m 14 geregistreerd worden. Het toevoegen van de gebruikte code wordt door de CP-500
automatisch verzorgd.
Voorbeeld Franklin 4+2: is alarm van zone 5 geprogrammeerd als code 3 (adres 744), dan wordt bij alarm in
zone 5 de melding "1 2 3 4 3 5" verzonden. Hierbij is 1234 het aansluitnummer, de tweede 3 de gepro-
grammeerde alarmcode en 5 de toegevoegde informatie dat de code betrekking heeft op zone nummer 5. Deze
toevoeging wordt door de CP-500 automatisch verzorgd.
Bij netspanningsuitval of -herstel wordt als eerste cijfer de geprogrammeerde code verzonden. Als tweede cijfer
wordt bij netspanningsuitval een '1' verzonden en bij netspanningsherstel een '2'.
Bij het onder spanning brengen van de centrale en bij een 24-uurs melding wordt de code '91' verzonden.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alphatronics CP-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alphatronics CP-500 in the language / languages: Dutch as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info