702259
4
Zoom out
Zoom in
Previous page
1/35
Next page
Installateurshandleiding AlphaVision 16 versie 1.9 oktober 1997 Blz. 1
Aansluiten en opstarten van de AlphaVision centrale
Voor het opstarten van een AlphaVision centrale is minimaal noodzakelijk:
- AlphaVision centrale print (de RS-485 converter is geïntegreerd op de print)
- een LCD of LED bedieningspaneel
- een (standaard) verbindingskabel RS-232 (geen NUL-modem kabel, dus pin 1 is doorverbonden met pin 1, pin 2 met
pin 2, pin 3 met pin 3, etc.)
- een IBM PC compatible computer of HP-200LX palmtop met het TERMPRIV.EXE programma (versie 4.1 of
hoger)
INSTALLEREN VAN TERMPRIV.EXE OP DE COMPUTER
Het programma, waarmee de gegevens van de AlphaVision centrale op het computer beeldscherm getoond wordt heet
TERMPRIV.EXE en is separaat verkrijgbaar.
Het programma TERMPRIV is een zogenaamd TERMINAL programma en zorgt er alleen maar voor, dat tekens en
commando's die via de seriële poort van de computer ontvangen worden, op het beeldscherm getoond worden. Op deze
wijze wordt het beeldscherm van de computer volledig bestuurd door het aangesloten apparaat. Bij het programmeren
ter plekke bestuurt de centrale dus rechtstreeks de computer.
Bij het hierna beschreven installeren van dit programma wordt uitgegaan van diskdrive A: en harde schijf C:. In plaats
van A: of C: mag dit bijvoorbeeld ook vervangen worden door B: of D: al naargelang de computerconfiguratie.
De automatische installatie van het programma gaat als volgt: zorg dat de computer teruggekeerd is naar DOS (het be-
sturingssysteem van de computer) en breng de diskette in de diskdrive.
Toets als opdracht in: A: <ENTER>
De indicatie <ENTER> duidt hierbij op de enter-toets.
Toets vervolgens als opdracht in: INSTALL C: <ENTER>
Let er hierbij op, dat tussen INSTALL en C: een spatie aanwezig moet zijn. Het terminal programma wordt nu automa-
tisch op de harde schijf C: geïnstalleerd. Hiertoe wordt een subdirectory ALARM aangemaakt en hierin wordt het
programma TERMPRIV.EXE gecopieerd.
Om het programma te starten moet eerst naar de juiste subdirectory op de harde schijf gegaan worden, waar het terminal
programma geïnstalleerd is. Dit gebeurt met behulp van de commando's:
C: <ENTER>
gevolgd door:
CD\ALARM <ENTER>
Vervolgens moet bekend zijn op welke seriële poort de interface kabel tussen de PC en de AlphaVision centrale of
tussen de PC en de RS-BOX aangesloten is. Dit wordt aangeduid als COM1, COM2, COM3 of COM4.
Wanneer de computer geen kleurenbeeldscherm heeft en de interface kabel op de eerste seriële poort aangesloten is,
wordt het terminal programma gestart met:
TERMPRIV <ENTER>
Wordt niet de eerste seriële poort gebruikt, dan moet het nummer van de seriële poort, voorafgegaan door het "/"-teken
achter het commando ingegeven worden. Wordt bijvoorbeeld de tweede seriële poort gebruikt, dan is het commando:
TERMPRIV /2 <ENTER>
Wordt een kleurenbeeldscherm gebruikt, dan kan dit aangegeven worden door /c toe te voegen aan het commando.
Worden bijvoorbeeld COM4 en een kleurenbeeldscherm gebruikt, dan wordt het commando:
TERMPRIV /4 /C <ENTER>
LET OP: de meest voorkomende fout, waarom programma's via de seriële poort niet werken, is, dat er een mouse-driver
geïnstalleerd is voor de te gebruiken poort!
Voor de gevorderde computergebruiker: het TERMPRIV.EXE programma mag in iedere willekeurige subdirectory
geïnstalleerd worden. Het heeft geen andere files nodig en kan zelfs vanaf diskette gebruikt worden.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alphatronics AlphaVision 16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alphatronics AlphaVision 16 in the language / languages: Dutch as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alphatronics AlphaVision 16

Alphatronics AlphaVision 16 User Manual - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info