560058
14
Zoom out
Zoom in
Previous page
1/16
Next page
72
Fig. 11
Position the runners (H) at the top and bot-
tom of the inside of the kitchen unit as
shown in Fig. 11 and mark the position of
the external holes.
After preparing the holes, screw the runners
to the kitchen unit door using 3.5x16 mm
screws.
Fig. 12
Open both the appliance door and that of
the kitchen unit to approx. 90°.
Place the little plates over the runners. Hold
the doors of the appliance and the unit
together and mark the holes.
Fig. 13
Remove the little plates and make the holes
with a diam. of 2 mm. Replace the little
plates over the runners and screw in the
screws provided (3.5x16 mm).
For the alignment of the kitchen unit door, if
necessary, use the clearance size of the
slotted holes.
At the end of the procedure, check that the
doors of the appliance and the kitchen unit
open properly.
D094
20mm
H
8mm
D415
D416
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Alno AKE8220IW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Alno AKE8220IW in the language / languages: German as an attachment in your email.

The manual is 0,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Alno AKE8220IW

Alno AKE8220IW User Manual - German - 17 pages

Alno AKE8220IW User Manual - Dutch - 16 pages

Alno AKE8220IW User Manual - French - 17 pages

Alno AKE8220IW User Manual - Italian - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info