472546

Allview T1 Vision Manual

12
Zoom out
Zoom in
Previous page
1/49
Next page
12
4.9 Term Description
Dial domestic calls
1.
The simplest method to dial a domestic call is click the corresponding numbers on the
dial keypad on the screen to input phone number, then press the dial key to dial a call
via SIM1 or SIM2. To change phone number, press “Clear key”. During dialing, the
screen will display a cartoon. When the other party is connected, the screen will
display the corresponding information.
2.
Press end key to end the call.
3.
To dial a domestic call, input area code + phone number and then press the dial key.
Dial international calls
1. If you want to make an international call, click the * key with the stylus for long until the
international dialing prefix “+” is seen on the screen. This will allow you make an
international call from any country without knowing the dialing prefix (for example, +86
represents China).
2. After inputting the prefix, you need to input the Country number and complete telephone
number. You can input the Country number according to the common practice, such as,
49 for Germany, 44 for British, 46 for Sweden, etc.
3. Dial international telephone number as following: “+” Country number + Complete
telephone number + Dial key.
Dial fixed-line telephone extension
1. Some fixed-line telephone extension may not directly get through, so you need to connect
to the switchboard at first then put through extension number. The mobile phone can
automatically dial extension number if you input “P” between the switchboard and
extension number. Method for input “P” as following: hold press or continually short press
three times “*” key (“P” will be shown on the display).
2. Dial fixed-line telephone extension as following: phone number + “P” + extension number
+ dialing key
Emergency calls
If your phone is under the network coverage (you can know this by checking the signal bar
at the up left corner on the screen), you can make emergency calls. If your network supplier
does not provide roaming service in this area, Emergency will be shown on the screen. That
means you can only make this kind of calls. If your phone is under the network coverage, you
can even make emergency calls without the SIM card.
In some areas, 112 (emergency call) service is provided by the network operator. In case of
failure, consult the network operator.
IMEI
International Mobile Equipment Identity number. Switch off the mobile phone and take off
the battery, then you will see the label with such number on the back of the mobile phone. Also,
this number is saved in the mobile phone. After switch-on, in standby state, input “*#06#” to
display it.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allview T1 Vision at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allview T1 Vision in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info