8
3 Start to Use
3.1 Insert SIM Card
PIN (personal identification number), PIN2, PUK (personal unlock key),
IMSI (international mobile subscriber identification) number, network
information, phone book and SMS (short message service) and other data
are stored in your SIM card.
Steps:
1> Hold the power key to turn off your mobile phone, and remove the
battery cover and then the battery.
2> Note: don’t pull out the extractor when inserting the SIM card.
Firstly, inserting the side with the unfilled corner.
Secondly, pushing the SIM card carefully with the card surface upwards
and move it into the groove of the SIM card holder.
3> Put the battery into the battery holder again, and close the battery
cover.
3.2 Insert T-Flash (Storage) Card
1> Hold the power key to turn off your mobile phone, and removing the
battery cover and then the battery.
2> Pushing the T-Flash card carefully with the card surface upwards and
move it into the groove of the T-Flash card holder.
3> Put the battery into the battery holder again, and close the battery
cover.
3.3 Battery & Charge
Indication of battery power:
Your mobile phone can monitor and display relevant information on the
battery.
1> Normally, you can check the remaining power of the battery from the
battery power icon on the top right corner of the screen.
2> The screen will display “Battery Low” when the battery power is
inadequate. If you have selected the prompt tone of any mode out of the
scene modes, the mobile phone will also give out a warning prompt tone.