535882
40
Zoom out
Zoom in
Previous page
1/175
Next page
ALL-VPN10 VPN/Firewall WLAN-N WAN Router
© ALLNET GmbH München 2013 - All rights reserved
40
WAN2 is not to support these destinations, users should select this option.
When the WAN1 connection is disconnected, packets for
10.0.0.1~10.254.254.254 cannot be transmitted through WAN 2, and there
is no need to remove the connection when WAN 1 is disconnected.
(2) Keep System Log and Remove the Connection: If an ISP connection failure
is detected, no error message will be recorded in the System Log. The
packet transmitted through this WAN will be shifted to the other WAN
automatically, and be shifted back again when the connection for the
original WAN is repaired and reconnected.
This option is suitable when one of the WAN connections fails and the traffic
going through this WAN to the destination IP should go through the other
WAN to reach the destination. In this way, when any of the WAN
connections is broken, other WANs can serve as a backup; traffic can be
shifted to a WAN that is still connected.
Detecting Feedback Servers:
Default Gateway:
The local default communication gateway location, such as the IP address of an
ADSL router, will be input automatically by the device. Therefore, users just
need to check the option if this function is needed. Attention! Some gateways
of an ADSL network will not affect packet detection. If users have an optical
fiber box, or the IP issued by ISP is a public IP and the gateway is located at the
port of the net café rather than at the IP providers port, do not activate this
option.
ISP Host:
This is the detected location for the ISP port, such as the DNS IP address of ISP.
When configuring an IP address for this function, make sure this IP is capable
of receiving feedback stably and speedily. (Please input the DNS IP of the ISP
port)
Remote Host:
This is the detected location for the remote Network Segment. This Remote
Host IP should better be capable of receiving feedback stably and speedily.
(Please input the DNS IP of the ISP port).
DNS Lookup Host:
This is the detect location for DNS. (Only a web address such as www.hinet.net
is acceptable here. Do not input an IP address.) In addition, do not input the
same web address in this box for two different WANs.
Note
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allnet ALL-VPN10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allnet ALL-VPN10 in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info