535882

Allnet ALL-VPN10 Manual

36
Zoom out
Zoom in
Previous page
1/175
Next page
ALL-VPN10 VPN/Firewall WLAN-N WAN Router
© ALLNET GmbH München 2013 - All rights reserved
36
Please refer to the explanations in 6.2.3 Configuring Protocol Binding for setting up Protocol Binding and
for examples of collocating router modes with Protocol Binding.
Specify WAN Binding Mode
This mode enables users to assign specific intranet IP addresses, destination application service ports or
destination IP addresses to go through an assigned WAN for external connection. After being assigned, the
specific WAN will only support those assigned Intranet IP addresses, specific destination application service
ports, or specific destination IP addresses. Intranet IP, specific destination application service ports and specific
destination IP that is not configured under the rules will go through other WANs for external connection. For
unassigned WANs, users can select Load Balance mode and select session or IP for load balancing.
● Session Balance: If “By Session” is selected, the WAN bandwidth will automatically allocate
connections based on session number to achieve network load balance.
● IP Balance: If “By IP” is selected, the WAN bandwidth will automatically allocate connections based
on the number of IP addresses to achieve network load balance.
Note!
Only when a device assignment is collocated with Protocol Binding can the balancing function be
brought into full play. For example, an assignment requiring all Intranet IP addresses to go through WAN 1
when connecting with service port 80, or go through WAN 1 when connecting with IP 211.1.1.1, must be
set up in the Protocol Binding Configuration.
Attention: When assigning mode is selected, as in the above example, the IP(s) or service provider(s)
configured in the connection rule will follow the rule for external connections, but those which are not
configured in the rule will still follow the device Load Balance system to go through other WAN ports to
connect with the Internet.
Please refer to the explanations in 6.2.3 Configuring Protocol Binding for setting up Protocol Binding and
for examples of collocating router mode with Protocol Binding.
Strategy Routing Mode
If strategy Routing is selected, the device will automatically allocate external connections based on routing policy
(Division of traffic between Telecom and Netcom is to be used in China) embedded in the device. All you have to do is
to select the WAN (or WAN group) which is connected with Netcom; the device will then automatically dispatch the
traffic for Netcom through that WAN to connect with the Internet and dispatch traffic for Telecom to go through the
WAN connected with Telecom to the Internet accordingly. In this way, the traffic for Netcom and Telecom can be
divided.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allnet ALL-VPN10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allnet ALL-VPN10 in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info