535882
35
Zoom out
Zoom in
Previous page
1/175
Next page
ALL-VPN10 VPN/Firewall WLAN-N WAN Router
© ALLNET GmbH München 2013 - All rights reserved
35
6.2.1 Load Balance Mode
Auto Load Balance Mode
When Auto Load Balance mode is selected, the device will use sessions or IP and the WAN bandwidth
automatically allocate connections to achieve load balancing for external connections. The network bandwidth is set
by what users input for it. For example, if the upload bandwidth of both WANs is 512Kbit/sec, the automatic load ratio
will be 1:1; if one of the upload bandwidths is 1024Kbit/sec while the other is 512Kbit/sec, the automatic load ratio
will be 2:1. Therefore, to ensure that the device can balance the actual network load, please input real upload and
download bandwidths.
Session Balance: If By Session” is selected, the WAN bandwidth will automatically allocate
connections based on session number to achieve network load balance.
IP Session Balance: If “By IP is selected, the WAN bandwidth will automatically allocate
connections based on IP amount to achieve network load balance.
Note!
For either session balancing or IP connection balancing, collocation with Protocol Binding will provide
a more flexible application for bandwidth. Users can assign a specific Intranet IP to go through a specific
service provider for connection, or assign an IP for a specific destination to go through the WAN users
assign to connect with the Internet.
For example, if users want to assign IP 192.168.1.100 to go through WAN 1 when connecting with the
Internet, or assign all Intranet IP to go through WAN 2 when connecting with servers with port 80, or
assign all Intranet IP to go through WAN 1 when connecting with IP 211.1.1.1, users can do that by
configuring “Protocol Binding.
Attention! When the Auto Load Balance mode is collocated with Protocol Binding, only IP addresses or
servers that are configured in the connection rule will follow the rule for external connections; those which are
not configured in the rule will still follow the device Auto Load Balance system.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allnet ALL-VPN10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allnet ALL-VPN10 in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info