535882

Allnet ALL-VPN10 Manual

31
Zoom out
Zoom in
Previous page
1/175
Next page
ALL-VPN10 VPN/Firewall WLAN-N WAN Router
© ALLNET GmbH München 2013 - All rights reserved
31
Connect on Demand
This function enables the auto-dialing function to be used for a PPTP dial
connection. When the client port attempts to connect with the Internet, the
device will automatically connect with the default ISP auto dial connection;
when the network has been idle for a period of time, the system will break the
connection automatically. (The default time for automatic break off when no
packets have been transmitted is five minutes).
Keep Alive
This function enables the PPTP dial connection to redial automatically when the
connection has been disconnected. Users can set up the redialing time. The
default is 30 seconds.
Enable Line-Dropped
Scheduling
The WAN disconnection schedule will be activated by checking this option. In
some areas, there is a time limitation for WAN connection service. For example:
the optical fiber service will be disconnected from 0:00 am to 6:00 am. Although
there is a standby system in the device, at the moment of WAN disconnection, all
the external connections that go through this WAN will be disconnected too.
Only after the disconnected lines are reconnected can they go through the
standby system to connect with the Internet. Therefore, to avoid a huge number
of disconnection, users can activate this function to arrange new connections to
be made through another WAN to the Internet. In this way, the effect of any
disconnection can be minimized.
Line-Dropped Period
Input the time rule for disconnection of this WAN service.
Line-Dropped
Scheduling
Input how long the WAN service may be disconnected before the newly added
connections should go through another WAN to connect with the Internet.
Backup Interface
Select another WAN port as link backup when port binding is configured. Users
should select the port that employs the same ISP.
After the changes are completed, click “Apply” to save the configuration, or click “Cancel" to leave without
making any changes.
Transparent Bridge
If all Intranet IP addresses are applied as Internet IP addresses, and users don’t want to substitute private network
IP addresses for all Intranet IP addresses (ex. 192.168.1.X), this function will enable users to integrate existing networks
without changing the original structure. Select the Transparent Bridge mode for the WAN connection mode. In this way,
users will be able to connect normally with the Internet while keeping the original Internet IP addresses in Intranet IP
configuration.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allnet ALL-VPN10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allnet ALL-VPN10 in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info