541391
65
Zoom out
Zoom in
Previous page
1/67
Next page
AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual 55
Chapter 7: Troubleshooting
Why Can I Not Access Setting Page with a Cable
Connection
Rechecking your physical connections. Make sure that power cable and RJ-45 cables are inserted tightly
and LED lights up correctly. If LED does not light up properly, try to swap RJ-45 cables.
If your client has a valid IP address, you can use “ping” to verify network connectivity. Run a command
window from the client’s PC’s start menu and ping your router’s LAN IP address (such as 192.168.1.1).
If pinging your router repeatedly timeout, you should try one of the following:
) Check your PC’s Network Connections in Control Panel.
) Reset the router and configure again.
My Laptop Cannot Find Wi-Fi Signal
Checking router’s Wireless LED lights up correctly. If LED does not light up properly, try to configure
the router via setting page.
Verify the client’s wireless adapter is installed and working properly. On a Windows client, check your
wireless connection from the Network Connections panels and make sure that its status is “Enabled”. If
the adapter is not listed, please check if the adapter is plug-in well and installed the driver. If the adapter
is listed but can not enable the connection, please check the Properties panel to make sure no resource
conflicts.
The Wireless Router Cannot Connect to the Internet
Correctly
If the AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router cannot connect to the Internet
correctly, check the following:
Make sure that your ISP provides service to you.
Rechecking your physical connections. Make sure that a RJ-45 cable connects WAN port on the router
and modem firmly.
Make sure that the router has a correct setting corresponds to your Internet type. If not, configure the
router again via setting page.
Resetting Factory Default Configuration
If you are experiencing problems with the AT-WR2304N and have tried all other troubleshooting measures,
use the Reset Configuration function. This will restore factory defaults and clear all settings, including
settings such as wireless settings.
Hold in the Reset button until the Power LED turns on to restore the factory default settings.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-WR2304N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-WR2304N in the language / languages: English as an attachment in your email.

The manual is 6,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info