541415

Allied Telesis AT-S7 Manual

56
Zoom out
Zoom in
Previous page
1/114
Next page
Ethernet Administration
44
To Configure a
TCP/IP Address
You can configure the IP Address of the switch by connecting to the serial
port of the switch and bringing up Omega or by using a BootP server. The
local installation of an IP address requires either a DOS terminal or a
Terminal Emulator Program and a serial cable.
Local Installation. Attach your terminal or PC to the RS232 serial port.
Enable Omega using either a DOS terminal or the terminal emulator program
in Windows. Then enter a TCP/IP address for each device.
The path for the appropriate TCP/IP configuration proceeds through Omega’s
Main menu and System administration submenu to the option IP
parameters. Enter the IP address as indicated.
Note that all switches have to be either configured with, or without, an IP
address. They cannot be mixed! A switch with an IP address will not respond
to a Connect remote system query from a switch which does not have an
IP address configured.
BootP You may also use a BootP server to configure TCP/IP parameters.
At start-up, if an IP address has not been configured, then your switch will
transmit a BootP request packet to the server approximately every three
seconds until a response is received (up to a maximum of three request
attempts).
If a BootP response is not received, then the system will operate with a switch
name or MAC address.
If a BootP response is received, then the IP address, Subnet Mask, and/or
Gateway/Router address will be extracted from the response packet and used
to configure the system until the next power-on/reset.
BootP server file format differs from server to server. The switches expect a
packet containing an IP address, Subnet Mask, and Gateway address.
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-S7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-S7 in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info