541411

Allied Telesis AT-S16 Manual

129
Zoom out
Zoom in
Previous page
1/154
Next page
Operations Manual
115
Note that while a unique LES and BUS pair must exist for each ELAN/
VLAN, only one LECS is required in the network itself.
Connections
Each LEC has separate VCCs to control address resolution requests and
data traffic. While each VCC carries traffic for only one ELAN, the VCCs
form a mesh of connections between the LECs and the other LANE entities
including the LECS, LES and the BUS.
Control
Connections
LEC ↔ LECS. A Configuration Direct VCC is a bi-directional VCC set up
by the LEC to be used to obtain configuration information such as the
address of the LES.
LEC ↔ LES/LEC ← LES. A Control Distribute VCC means VCCs will be
set up between a LEC and a LES. First, the LEC sets up a bi-directional
point-to-point VCC to the LES for sending control frames. In turn, the LES
may optionally set up a unidirectional point-to-point or point-to-multipoint
VCC for distributing control traffic from LES to LEC.
Data Connections Data VCCs are used to carry data frames between LECs or between an LEC
and the BUS. These carry data frames as well as flush messages. Apart from
flush messages, data VCCs never carry control traffic.
LEC ↔ LEC. A Data Direct VCC is set up to carry the unicast frames
between two LECs. When there are data packets to send, but the ATM
address of the destination MAC address is unknown, the LEC will forward
the packets to the BUS to broadcast them to all devices in the ELAN and, in
the meantime, query the LES of the ATM address for the destination
address.
If the LES does not have the ATM address of the MAC address, it will run an
address resolution protocol to resolve it. After receiving a reply with the
ATM address from the LES, the LEC sets up a point-to-point VCC to that
destination ATM address. After the data VCC is set up, all subsequent data
will be sent over the VCC to the LAN destination.
LEC ↔ BUS. After obtaining the BUS’s ATM address from the LES, a VCC
LEC sets up a bi-directional Multicast Send VCC to the BUS.
… 129 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-S16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-S16 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info