541411
21
Zoom out
Zoom in
Previous page
1/154
Next page
Operations Manual
7
Bridging
Your switch operates as a transparent bridge to the Ethernet ports. As such,
it learns the source Media Access Control (MAC) addresses of all incoming
packets and ages out devices which have not been heard from for either a
user or the default-specified length of time.
The switch maintains a forwarding table with a maximum storage capacity of
2,048 MAC address (recall that 6 of these addresses are reserved by
developmental engineering). These Ethernet addresses are associated with
all of the devices that have been detected recently.
Your switch checks all incoming packets from each port for their destination
address against a Bridge Address Table. If a packet’s destination address is
not on the same network segment as the originating packet, the switch
forwards the packet to the network segment associated with that destination
address. However, if the packet’s source and destination address are on the
same network segment, known as local traffic, the packet is automatically
discarded (ignored) or filtered.
Bridge Address
Table
The switch creates and maintains a dynamic database of addresses which are
stored in a Bridge Address Table. Port information entries in the Bridge
Address Table are, in turn, used as a basis from which to compare and
examine every packet to determine its source address, segment origin and
port information.
If a packet’s MAC address is not already stored in the Bridge Address Table,
the switch adds the learned address, the associated port number and a timer
value that indicates the age of the dynamic Bridge Address Table entry.
Consequently, the switch knows the address and associated port number the
next time it sees that address. By using the information stored in the Bridge
Address Table, the switch is able to quickly forward each packet to the
correct port.
The switch learns addresses from all packets. When devices are added to the
network, removed from it, or relocated, you do not have to reconfigure your
switch. Your switch automatically learns all addresses.
An address stored in the Bridge Address Table is discarded if there is no
activity from that address after approximately five minutes. This aging
process ensures that the Bridge Address Table is not only continually
updated but only includes current entries.
Each entry which is automatically entered (a dynamic entry) includes:
An Ethernet MAC address
The port number of the LAN on which the address resides
The age of the entry
Note that the procedure to assign a port number of the LAN for the above
address is also contained in the LAN Emulation menu (Port to ELAN
configuration screen).
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-S16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-S16 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info