541397
21
Zoom out
Zoom in
Previous page
1/28
Next page
AT-RG613/623TX Series Residential VoIP Gateway - User Manual 19
UTP CABLE CONNECTION
To connect devices to the WAN and LAN ports using UTP cables follow the steps
below:
1. Ensure that all cables are the right length to reach each device.
2. Plug the UTP cable into the WAN port until you hear a “click” and make sure
it is correctly fixed by pulling the UTP cable lightly. In the same way, connect
the plug on the other end of the UTP cable to the WAN device.
The type of UTP cable (straight cable or crossed cable) depends on the kind of
WAN connection device being used (e.g. cable modem / ADSL modem etc.).
3. If you only need VoIP functions, your connection operation ends here. If you
are connecting devices to the LAN port of this product, please follow the
procedure as described in Fig 29 below.
Figure 29: UTP cable connections
4. Push in the plug of the UTP cable to the LAN port until you hear a “click” and
make sure it is correctly fixed by pulling the UTP cable lightly. In the same way
connect the plug on the other end of the UTP cable to the network interface
card of the computer, or other LAN device.
The length of each cable must be less than 100 m.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-RG623TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-RG623TX in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info