Manual Allied Telesis AT-GS950-8 (page 45 of 50) (English)

541402

Zoom out

Zoom in

1/50

AT-GS950/8, AT-GS950/16 and AT-GS950/24 Switches Installation Guide

 If the remote network device is a management device,

use its management firmware to determine whether its

port is enabled.

 Test the attenuation on the fiber optic cable with a fiber

optic tester to determine whether the optical signal is

too weak (sensitivity) or too strong (maximum input

power).

Problem 5: Network performance between a twisted pair port on the

switch and a network device is slow.

Solution: There might be a duplex mode mismatch between the port and

the network device. This occurs when a twisted pair port using Auto-

Negotiation is connected to a device with a fixed duplex mode of full

duplex. If this is the cause of the problem, adjust the duplex mode of the

port on the network device or on the switch so that both ports are using the

same duplex mode.

Problem 6: A port’s LINK/ACT LED is blinking.

Solutions: The link between the port and the network device is

intermittent. Try the following:

 Connect another network device with a different cable

to the port. If the Link LED remains steady on, then the

problem is with the original cable or the network

device.

 If the problem is with an SFP transceiver, check that

the transceiver is fully inserted in the slot.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-GS950-8 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allied Telesis AT-GS950-8 Manual

Product: