541394

Allied Telesis AT-AR256E v3 Manual

54
Zoom out
Zoom in
Previous page
1/58
Next page
54 AT-AR256E v3 - 4 Ports ADSL2/2+ Router - User Manual
Remote Log
Remote Log allows you to forward all logged information to one (or more) remote computer. The type of
information forwarded to the remote computer depends on the Log level. Each log message belongs to a
certain log level, which indicates the severity of the event.
When you configure remote logging, you must specify a severity level. Log messages that are rated at that
level or higher are sent to the log server and can be viewed using the server log application, which can be
downloaded from the web.
Figure 47: Remote Log Settings
To enable remote logging:
1. Go to the Status menu then click Remote Log.
2. Select a Log Level. There are 8 log levels listed below in order of severity.
• Panic System panic or other condition that causes the router to stop functioning.
• Alert Conditions that require immediate correction, such as a corrupted system database.
• Critical Critical conditions such as hard drive errors.
• Error Error conditions that generally have less serious consequences than errors in the emergency,
alert and critical levels.
• Warning Conditions that warrant monitoring.
• Notice (Default) Conditions that are not errors but might warrant special handling.
• Info Events or non-error conditions of interest.
• Debug Software debugging message. Specify this level only when directed by a technical support
representative.
3. Enter the IP Address where the log will be sent to then click Add.
4. Click Apply. The IP address will appear in the Select a logging destination drop- down menu.
5. To make changes permanent, click Save Settings.
When you select a log level, all log information within this severity level and levels above (meaning, more
severe levels) will be sent to the remote host.
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-AR256E v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-AR256E v3 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info