541394
24
Zoom out
Zoom in
Previous page
1/58
Next page
24 AT-AR256E v3 - 4 Ports ADSL2/2+ Router - User Manual
LAN
The router is preconfigured to automatically provide IP addresses to all the computers in the Local Area
Network (LAN). Your router allows you to create and configure LAN groups.
LAN Configuration
Your router’s default IP address and subnet mask are 192.168.1.1 and 255.255.255.0, respectively. This
subnet mask allows the router to support 254 users. If you want to support more users, you need to edit the
subnet mask but remember that the DHCP server is defaulted to only give out 254 IP addresses. If you
change your gateways’ IP address and you have DHCP enabled, the DHCP configuration must reside within
the same subnet. The default gateway is the routing device used to forward all traffic that is not addressed
to a station within the local subnet. Your ISP will provide you with the default gateway Address.
Figure 15: LAN Configuration
To configure the LAN groupings:
1. Select the Advanced menu.
2. Select LAN > LAN Configuration.
3. Select ETHERNET in LAN group 1 then click < Remove. No packets will be sent to the
ETHERNET interface because it does not belong to any LAN group.
4. Select ETHERNET from Interfaces then click Add > under LAN group 2. Just like in LAN group
1, Configure will appear in LAN group 2 to allow the definition of additional configurations.
5. To temporarily activate the settings, click Apply.
6. To make changes permanent, click Save Settings.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-AR256E v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-AR256E v3 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info