The following fields are displayed in the OSPF LSDB Table:
ParameterDescription
Area ID
Allows the entry of an OSPF Area ID.This Area ID will then be used to search the table,and display an entry –
if there is one.
LSDB TypeDisplays which one of eight types of link advertisements by which the current link was discovered by the
Switch:
All,Router link (RTRLink),Network link (NETLink),Summary link (Summary),Autonomous System link
(ASSummary),Autonomous System external link (ASExternal),MCGLink (Multicast Group),and NSSA (Not So
Stubby Area)
Adv. Router IDDisplays the Advertising Router’s ID.
Link StateID This field identifies the portion of the Internet environment that is being described by the advertisement.
The contents of this field depend on the advertisement's LS type.
LS TypeLinkState ID
1The originating router's Router ID.
2The IP interface address of the network's Designated Router.
3The destination network's IP address.
4
The Router ID of the described AS boundary router.
CostDisplays the cost of the table entry.
SequenceDispla
ys a sequence number corresponding to number of times the current link has been advertised as
changed.
Browse OSPF Neighbor Table
This table can be found in the OSPF Monitoring folder by clicking on the Browse OSPF Neighbor Tablelink.Routers that are connected to the same
area or segment become neighbors in that area.Neighbors are elected via the Hello protocol.IP multicast is used to send out Hello packets to other routers on
the segment.Routers become neighbors when they see themselves listed in a Hello packet sent by another router on the same segment.In this way,two-way
communication is guaranteed to be possible between any two neighbor routers.This table displays OSPF neighbors of the Switch.
Figur
e 9- 35.
OSPF Neighbor
Table
To search for OSPF neighbors,enter an IP address and click
Find.Valid OSPF neighbors will appear in the OSPF Neighbor Tablebelow.
OSPF V
irtual Neighbor
This table can be found in the OSPF Monitoring folder by clicking on the Browse OSPF Virtual Neighbor link.This table displays a list of Virtual
OSPF Neighbors
of the Switch.The user may choose specifically search a virtual neighbor by using one of the two search options at the top of the screen,
which are:
ParameterDescription
Transit Area IDAllows the entry of an OSPF Area ID – previously defined on the Switch – that allows a remote area to
communicate with the backbone (area 0).A Transit Area cannot be a Stub Area or a Backbone Area.
Neighbor IDThe OSPF router ID for the remote router.This IP address uniquely identifies the remote area’s Area Border
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Allied Telesis AT-9724TS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Allied Telesis AT-9724TS in the language / languages: English as an attachment in your email.
The manual is 8,71 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
