Open the shipping carton of the Switch and carefully unpack its contents.The carton should contain the following items:
•One AT-9724TS Switch
•One AC power cord
•One Stacking Cable
•One CD which includes the AT-9724TS Manual,and Net.Cover documents
•One Warranty Card
•Mounting kit (two brackets and screws)
•
Four rubber feet with adhesive backing
•RS-232 console cable
•If any item is found missing or damaged,please contact your local Allied Telesyn Reseller for replacement.
2-2 Before You Connect to the Network
The site where you install the Switch may greatly affect its performance.Please follow these guidelines for setting up the Switch.
•Install the Switch on a sturdy,level surface that can support at least 6.6lb.(3kg) of weight.Do not place heavy objects on the Switch.
•The power outlet should be within 1.82 metres (6 feet) of the Switch.
•Visually inspect the power cord and see that it is fully secured to the AC power port.
•Make sure that there is proper heat dissipation from and adequate ventilation around the Switch.Leave at least 10 cm (4 inches) of space at the front
and rear of the Switch for ventilation.
•Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity operating ranges.
•Install the Switch in a site free from strong electromagnetic field generators (such as motors),vibration,dust,and direct exposure to sunlight.
•When installing the Switch on a level surface,attach the rubber feet to the bottom of the device.The rubber feet cushion the Switch,protect the
casing from scratches and prevent it from scratching other surfaces.
•Ensure you program the Switch with a valid IP address – see section xxxx.
2-3 Installing the Switch without a Rack
When installing the Switch on a desktop or shelf,the rubber feet included with the Switch should first be attached.Attach these cushioning feet on the bottom
at each corner of the device.Allow enough ventilation space between the Switch and any other objects in the vicinity.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Allied Telesis AT-9724TS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Allied Telesis AT-9724TS in the language / languages: English as an attachment in your email.
The manual is 8,71 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
