541404

Allied Telesis AT-8000-8POE Manual

301
Zoom out
Zoom in
Previous page
1/360
Next page
AT-S81 Management Software User’s Guide
Section II: Web Browser Interface 301
Basic RSTP Configuration
To configure the RSTP settings, perform the following procedure:
1. From the Basic Config menu, select Rapid Spanning Tree > RSTP
Config.
The Rapid Spanning Tree Configuration page is shown in Figure 91 on
page 300.
The RSTP Configuration page allows you to configure RSTP as well
as to view the current settings and contains the following items of
information in the middle portion:
Root Port
The active port on the switch that is communicating with the root
bridge. If the switch is the root bridge for the LAN, then there is no root
port and the root port parameter will be 0.
Root Path Cost
The sum of all the root port costs of all the bridges between the
switch’s root port and the root bridge including the switch’s root port
cost.
Time Since Topology Change
The time in seconds since the last topology change took place. When
RSTP detects a change to the LAN’s topology or when the switch is
rebooted, this parameter is reset to 0 seconds and begins
incrementing until the next topology change is detected.
Topology Change Count
An integer that reflects the number of times RSTP has detected a
topology change on the LAN since the switch was initially powered on
or rebooted.
The following parameters refer to the designated root bridge:
Designated Root
This parameter includes two fields: the root bridge priority and the
MAC address of the root bridge. For example, 1000 00C08F1211BB
shows the root bridge priority as 1000, and 00C08F1211BB as the
MAC address.
Hello Time
The hello time. See “Hello Time and Bridge Protocol Data Units
(BPDUs)” on page 157. This parameter affects only the root bridge.
Maximum Age
The maximum amount of time that BPDUs are stored before being
deleted on the root bridge.
… 301 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-8000-8POE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-8000-8POE in the language / languages: English as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info