Manual Allied Telesis AT-8000-8POE (page 292 of 360) (English)

541404

292

Zoom out

Zoom in

1/360

Chapter 26: Quality of Service (QoS)

292 Section II: Web Browser Interface

Mapping CoS Priorities to Egress Queues

This procedure explains how to change the default mappings of CoS

priorities to egress priority queues, as shown in Table 5 on page 135. This

is set at the switch level. You cannot set this at the per-port level. This

procedure also enables and disables QoS.

To change the default mappings of CoS priorities to egress priority queues

or to enable or disable QoS, perform the following procedure:

1. From the Advanced Config menu, select QoS Config > Traffic Class.

The Traffic Class Configuration page opens, as shown in Figure 87.

Figure 87. Traffic Class Configuration Page

2. To enable or disable QoS, select Enable or Disable from the QoS

Status list. The default is disabled.

3. To change the egress priority queue assignment of an 802.1p priority

class, click the dialog circle of the queue for the corresponding priority.

For example, to direct all tagged traffic with a priority of 4 to egress

queue 3 on the ports, you would click the button for queue 3 in the

priority 4 row.

4. Click Apply.

Note

The switch does not alter the original priority level in tagged frames.

Frames leave the switch with the same priority level they had when

they entered the switch.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-8000-8POE in the language / languages: English as an attachment in your email.

The manual is 5,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allied Telesis AT-8000-8POE Manual

Product: