Manual Allied Telesis AT-8000-8POE (page 263 of 360) (English)

541404

263

Zoom out

Zoom in

1/360

AT-S81 Management Software User’s Guide

Section II: Web Browser Interface 263

4. Click Apply.

The trunk is now operational on the switch.

5. Configure the port trunk on the other switch and connect the cables.

Modifying a Port

Trunk

This procedure adds and removes ports from a port trunk.

Note

You should disconnect the cables from the ports of the trunk on the

switch before modifying it. Adding or removing ports from a trunk

without first disconnecting the cables can create loops in your

network topology, which can cause broadcast storms and poor

network performance.

To add or remove ports from a trunk, perform the following procedure:

1. From the Advanced Config menu, select Trunk Config.

The Trunk Configuration page is shown in Figure 77.

2. On the row that corresponds to the trunk you want to modify, from the

list, select Disable.

Note

Allied Telesis recommends disabling a port trunk before adding or

removing ports.

3. Click Apply.

4. To add or remove a port from a trunk, click the check box for the port in

the corresponding trunk row. A check in a box indicates the port is a

member of the trunk. No check means the port is not a member.A port

trunk can contain up to eight ports.

5. On the row that corresponds to the trunk you want to modify, from the

list, select Enable.

6. Click Apply.

7. Modify the port trunk on the other switch and reconnect the cables.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-8000-8POE in the language / languages: English as an attachment in your email.

The manual is 5,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allied Telesis AT-8000-8POE Manual

Product: