Manual Allied Telesis AT-8000-8POE (page 21 of 360) (English)

541404

Zoom out

Zoom in

1/360

AT-S81 Management Software User’s Guide

Local Connection

To establish a local connection with a switch, you connect a terminal or a

PC with a terminal emulator program to the terminal port on the front of the

switch using the management cable included with the unit. This type of

connection is referred to as “local” because you must be physically close

to the switch, such as in the wiring closet where the switch is located.

Note

For instructions on how to start a local management session, refer to

“Starting a Local Management Session” on page 26.

With a local connection, you can manage the switch using the menus or

CLI.

A switch does not need an Internet Protocol (IP) address for you to

manage it locally. You can start a local management session on a switch

at any time. It does not interfere with the forwarding of network packets by

the device.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-8000-8POE in the language / languages: English as an attachment in your email.

The manual is 5,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allied Telesis AT-8000-8POE Manual

Product: