541413
59
Zoom out
Zoom in
Previous page
1/114
Next page
AT-S7/AT-S9 Operations Manual
47
Received BPDUs will be submitted for transmission. They will also be
processed as required by the STP algorithm.
Disabled indicates a port that is NOT PARTICIPATING in frame relay. Nor
is it participating in the operation of the STP algorithm and protocol.
Received frames are discarded. Submitted frames are not forwarded for
transmission.
Disabled is left when the port is enabled by management action and the
blocking state is entered.
Polarity. The Polarity column shows the state of each UTP port’s receive
pair polarity: either Normal or Reversed.
Normal indicates correct polarity.
Reversed indicates incorrect polarity — software has detected that
your wiring has been installed with reversed polarity. It has also
subsequently corrected it. Operator intervention is not required.
Port Configuration To change port information, enter a port number from the Port Status menu.
The Port Configuration Menu appears. In this case, port #16 was selected.
The system and port name appear at the top of the screen. Below that is the
port’s status and configuration. And, below that, you see three menu options.
The following configuration options are available:
Enable/Disable. Selecting
Enable changes the port’s state to allow it to
transmit or receive data. Selecting Disable turns the port logically off, thus
preventing port traffic.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-4016F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-4016F in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info