541413

Allied Telesis AT-4016F Manual

18
Zoom out
Zoom in
Previous page
1/114
Next page
Product Description
6
Ethernet Switching
There are two popular methods to forward information: store-and-forward
and cut-through. Although your switch employs store-and-forward as the
default, you can also choose cut-through.
Store-and-forward Store-and-forward means that your switch stores the entire packet and then
forwards it.
Store-and-forward switching, performed at the MAC layer, allows your
switch to temporarily store packets until network resources, typically a
congested port, are available. Frames which are incorrect, an invalid CRC for
example, are discarded. Store-and-forward switching, therefore, ensures data
integrity, thus preventing network error conditions from being generated
throughout the network.
Store-and-forward mode is implemented when packets are converted to cells
on each ATM transmission.
Cut-through In a cut-through system, the device starts to forward the incoming packet
while the packet is still being received on the inbound link.
Cut-through switching requires software that can both look at the start of the
packet and determine which outbound link is to be used to forward the
packet. Cut-through does not check for errors before forwarding a packet.
Bridging
Your switch operates as a transparent bridge to the Ethernet ports. As such,
it learns the source Media Access Control (MAC) addresses of all incoming
packets and ages out devices which have not been heard for a user or default
specified period of time.
The switch maintains a forwarding table with a maximum storage capacity of
2,048 MAC address. These Ethernet addresses are associated with all of the
devices that have been detected recently.
Your switch checks all incoming packets from each port for their destination
address against a Bridge Address Table. If a packet’s destination address is
not on the same network segment as the originating packet, the switch
forwards the packet to the network segment associated with that destination
address. However, if the packet’s source and destination address are on the
same network segment, known as local traffic, the packet is automatically
discarded (ignored) or filtered.
Bridge Address
Table
The switch creates and maintains a dynamic database of addresses which are
stored in a Bridge Address Table. Port information entries in the Bridge
Address Table are, in turn, used as a basis from which to compare and
examine every packet to determine its source address, segment origin and
port information.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AT-4016F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AT-4016F in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info