Manual Allied Telesis AR450S (page 74 of 134) (English)

541401

Zoom out

Zoom in

1/134

74 AR400 Series Router User Guide

Software Release 2.7.1

C613-02021-00 REV F

When you use commands with a physical interface as a parameter, you have

the option to use either the simple name or the fully qualified name of the

interface.

For examples of valid simple names and the equivalent fully qualified names

see the Interfaces chapter in the Software Reference.

To display a summary of all the interfaces on the router, enter the command:

SHOW INTERFACE

Ethernet Ports

An Ethernet interface on the router is automatically configured by the software

modules when the router starts up. No user configuration of the Ethernet

interfaces is required, except to enable other software modules to use the

interface. This is achieved by adding a software module interface and using the

clause INTERFACE=ethn

, where n is the number of the Ethernet interface

being configured

. For example, to add a logical interface to the IP module,

enter the command:

ADD IP INTERFACE=eth0 IPADDRESS={ipadd|DHCP}

To display the modules in the router that are configured to use an Ethernet

interface, and the encapsulations used on an interface, enter the command:

SHOW ETH=n CONFIGURATION

where n is the number of the Ethernet interface.

For more information about Ethernet interfaces and encapsulations, see the

Interfaces chapter in the Software Reference.

BRI Basic Rate ISDN interface

ETH Ethernet interface (excluding switch ports)

PRI Primary Rate ISDN interface

SYN Synchronous interface

Logical interfaces

VLAN Virtual LAN interface over switch ports, numbered from 1

FR Frame Relay interface

LAPB X.25 LAPB interface

PPP Point-to-Point Protocol interface

X25C X.25 DCE interface

X25T X.25 DTE interface

Table 7: Interface type names.

Type Descrip tion

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR450S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allied Telesis AR450S Manual

Product: