541401
65
Zoom out
Zoom in
Previous page
1/134
Next page
Operating the router 65
Software Release 2.7.1
C613-02021-00 REV F
2. Load the new release file onto the router.
Make sure there is space in FLASH for the new release file. Load the new
file onto your router. Make sure the release file matches your router model
(see “Upgrading Router Software” on page 63). Load any patch files
required, and the help file for the release (see “Loading and Uploading Files
on page 59). To load the release file using your LOADER default settings,
enter the command:
Wait for the release to load. This can take several minutes, even if you are
loading the file over a high speed link. To see the progress of the load, enter
the command:
SHOW LOAD
To check that the files are successfully loaded, enter the command:
SHOW FILE
3. Enter licence information for the release.
Enter the licence password for the software release.
The release licence password is provided by your authorised distributor or
reseller and is unique for the release number, the file name and the router’s
serial number.
Enter passwords for any special feature licences.
ENABLE FEATURE=feature PASSWORD=password
4. Test the release.
Set the new release to run as a temporary install. This sets the router to load
the new release once only when it reboots.
If you want to use the current router configuration again, store the
dynamic configuration as a configuration script file and set the router to
use this configuration when it restarts. Releases are generally backward-
compatible, so your current configuration should run with little or no
modifications on the later release.
CREATE CONFIG=myconfig.cfg
SET CONFIG=myconfig.cfg
The SET CONFIG information survives the release update.
Reboot the router.
RESTART REBOOT
The router reboots, loading the new release file and the specified
configuration. Display the install history, and check that the temporary
release was loaded.
SHOW INSTALL
5. Make the release the default (permanent) release.
If the router operates correctly with the new release, make the release
permanent.
Every time the router reboots from now on, it loads the new release from
FLASH.
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR450S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR450S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info