541401
49
Zoom out
Zoom in
Previous page
1/134
Next page
Getting Started with the Graphical User Interface (GUI) 49
Software Release 2.7.1
C613-02021-00 REV F
Problem The router’s clock does not synchronise with the NTP peer.
Solution
The router’s clock can only synchronise with the NTP peer if its initial time
is similar to the NTP peers time (after setting the UTC offset). Manually
set the router’s time so that it is approximately correct, and enable NTP
again.
Check that the UTC offset is correct.
Problem The routers time is incorrect, even though it assigns the correct time to
devices on the LAN.
Solution The UTC offset is probably incorrect, or needs to be adjusted for the beginning
or end of summer time. To correct this, select Configuration > System > Time
and enter the correct offset.
Loading Software
Problem You have attempted to load a new release file onto the router, but the load
has failed and you cannot access the router through the GUI.
Solution 1. Access the router’s CLI (see “Connecting a Terminal or PC” on page 14).
If the router has been switched off or has rebooted since you attempted to
load the release file, it will boot up with the default installation. This
contains the commands you require to load a file.
Log into the router using the manager account and password.
2. Download the release file to the router. See Example: Upgrade to a New
Software Release Using TFTP” on page 64 for an example.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR450S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR450S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info