541401

Allied Telesis AR450S Manual

45
Zoom out
Zoom in
Previous page
1/134
Next page
Getting Started with the Graphical User Interface (GUI) 45
Software Release 2.7.1
C613-02021-00 REV F
• Any password and authentication settings must be configured on the
neighbour as well as on this router.
■ Check that the router is passing the correct DNS information to hosts on
the LAN, if the router is a DHCP server. If the router acting as a DHCP
client as well, and therefore is passing on DNS information from another
DHCP server, check that this DHCP server is providing the router with the
correct information.
Problem A device on the LAN or DMZ can send some traffic out, but cannot receive
traffic.
Solution If you are using a static Standard NAT, this problem may indicate that NAT is
mapping to an invalid IP address. To check this, select Configuration > Firewall
> NAT.
Problem Incoming traffic is sent to the wrong host.
Solution If you are using a static Standard NAT, this problem may indicate that NAT is
mapping to a valid IP address, but which belongs to the wrong host. To correct
the IP address, select Configuration > Firewall > NAT.
Problem Only one device on the LAN or DMZ can access the Internet.
Solution
■ If you are using a static Standard NAT, only one device from the LAN will
be able to access the Internet. If you wish to have more than one device
access the Internet, use Enhanced NAT instead (Configuration > Firewall >
NAT).
■ It is also possible that no other device has been configured with the correct
gateway.
Firewall
Diagnosis To see information about the traffic that the firewall has denied, use the CLI
command SHOW FIREWALL EVENT=DENY
To see information about the traffic that the firewall has allowed, use the CLI
command SHOW FIREWALL EVENT=ALLOW
Problem Legitimate traffic is not reaching your LAN or DMZ.
Solutions
■ Check that a rule exists to allow the traffic (Firewall > Configuration >
Traffic Rules)
Activating a DMZ does not provide access to servers on it. Rules must be
created for each server on the DMZ. Likewise, by default there is no access
to any devices on the private LAN.
■ If the rule exists, it may be incorrect or insufficient. Check that:
• Rules intended to allow traffic have an action of “Allow”.
• The firewall is processing the rules in the order you expected, and that
specific rules (e.g. allow IP address x access to FTP on the server) have
lower numbers than general rules (e.g. deny all FTP access).
• The ports, services and protocols are correct.
• The IP addresses the rules apply to are entered correctly, and belong to
the specified devices.
• The rules apply to the correct days and time.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR450S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR450S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info