541401
34
Zoom out
Zoom in
Previous page
1/134
Next page
34 AR400 Series Router User Guide
Software Release 2.7.1
C613-02021-00 REV F
Using the GUI: Navigation and Features
The GUI consists of a large number of pages, which you navigate between using
the menu on the left of the browser window. This section describes how to use
the GUI, and gives an overview of its functionality.
The Quick Start Menu (some models only)
The Quick Start options offer one-page configuration of your WAN or LAN
connection.
The WAN option provides a single page to simply specify your WAN
interface and choose between a PPPoE connection, a static IP address,
or using DHCP to dynamically assign an IP address. Your ISP will
supply information about the appropriate settings. You can also enter
DNS servers here
The LAN page lets you change the IP address and/or mask of the
default VLAN (vlan1).
On models with ADSL ports, this menu provides a quick ADSL setup
option.
The Configuration Menu
You can use the GUI to configure:
the system identity and mail server
the system time, or NTP (Network Time Protocol)
triggers, to automatically run scripts at a time you specify or in response
to events you specify
ping polling, to monitor device reachability and respond to changes in
reachability
SNMP (Simple Network Management Protocol)
switch port settings
802.1x port security
Quality of Service, to prioritise packets and manage bandwidth
speed and duplex setting of the Eth ports (for models with Eth ports)
PPPoE connections
PPP dial-up connections over ISDN, and leased-line connections over
synchronous interfaces (on models with an appropriate PIC card
installed)
Internet Protocol: interfaces, static routes, the preferences of dynamic
routes, RIP, multicasting, and OSPF
Virtual Private Networks (VPNs) on AR450S routers, for connecting the
router to a central office
the DHCP server, to dynamically assign IP addresses to hosts in your
LAN
IPX (on AR410 Series routers)
the firewall on AR450S routers, to protect your LAN and public servers
from attack. Firewall configuration includes options for logging and
alerts
AR450S Router
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR450S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR450S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info