541401
31
Zoom out
Zoom in
Previous page
1/134
Next page
Getting Started with the Graphical User Interface (GUI) 31
Software Release 2.7.1
C613-02021-00 REV F
See “Browser and PC Setup” on page 24 for more information.
3. If necessary, bypass the HTTP proxy server
See “HTTP Proxy Servers” on page 25 for more information.
4. Browse to the router
For normal access, point your web browser to
http://ip-address
where ip-address is the interface’s IP address.
To access the router securely if SSL (Secure Sockets Layer) has been
configured on the interface, point your web browser to
https://ip-address
For more information about secure access, see “Secure Access” on page 31.
5. At the login prompt, enter the user name and password
The default username is manager:
User Name: manager
Password: friend
The System Status page is displayed (see Figure 5 on page 33). Select
options from the sidebar menu to configure and manage the router.
If the Firewall and/or VPN (IPSec) have already been configured on the router
using the CLI, this configuration may conflict with the GUI. Do not attempt to
modify existing CLI firewall or VPN configuration with the GUI.
Secure Access
You can optionally browse to the router using Secure Sockets Layer (SSL). This
means that sensitive data including passwords and email addresses can not be
accessed by malicious parties. This section details the required configuration.
For information about SSL, refer to the Secure Sockets Layer (SSL) chapter of
your Software Reference.
For this configuration to succeed your router must have PKI, ISAKMP, SSH and SSL
feature licences. If these licences are not already present on your router, please contact
your authorised distributor or reseller.
To secure your router’s HTTP Server with SSL for secure router
management via the GUI.
1. Create a Security Officer user account
Only a user with Security Officer privilege can enable system security and SSL.
To add a user with the login name “CIPHER”, password “sbr4y3”,
login=yes, and SECURITY OFFICER privilege, use the command:
ADD USER="CIPHER" PASSWORD="sbr4y3"
PRIVILEGE=SECURITYOFFICER Login=yes
CREATE CONFIG=ssl.cfg
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR450S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR450S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info