Manual Allied Telesis AR450S (page 17 of 134) (English)

541401

Zoom out

Zoom in

1/134

Getting Started with the Command Line Interface (CLI) 17

Software Release 2.7.1

C613-02021-00 REV F

AR410 and Switching on the AR440S, AR441S and AR450S in the Software

Reference. For more information about IP addressing and routing, see Chapter

6, Routing in this document, and the Internet Protocol (IP) chapter in the

Software Reference.

Setting Routes

The process of routing packets consists of selectively forwarding data packets

from one network to another. Your router makes a decision to send a packet to

a particular network on information it learns dynamically from listening to the

selected route protocol and on the static information entered as part of the

configuration process. In addition, you can configure user-defined filters to

restrict the way packets are sent.

Your router maintains a table of routes which holds information about routes to

destinations. The route table tells the router how to find a remote network or

host. A route is uniquely identified by IP address, network mask, next hop,

ifIndex, protocol and policy. A list of routes comprises all the different routes to

a destination. The routes may have different metrics, next hops, policy or

protocol. A list of routes is uniquely identified by its IP address and net mask.

The routing table is maintained dynamically by using one or more routing

protocols such as RIP, EGP and OSPF. These act to exchange routing

information with other routers or hosts.

You can also add static routes to the route table to define default routes to

external routers or networks and to define subnets.

To add a static route, enter the command:

ADD IP ROUTE=ipadd INTERFACE=interface NEXTHOP=ipadd

[CIRCUIT=miox-circuit] [DLCI=dlci]

[MASK=ipadd][METRIC=1..16] [METRIC1=1..16]

[METRIC2=1..65535][POLICY=0..7] [PREFERENCE=0..65535]

To displays the entire routing table, including both static and dynamic routes,

enter the command:

SHOW IP ROUTE

For more information about setting IP routes, see the Internet Protocol (IP)

chapter in the Software Reference.

Changing a Password

You should change this password to prevent unauthorised access to the router.

Enter the command:

SET PASSWORD

The router prompts you for the current password, for the new password, and

for confirmation of the new password. The password can contain any printable

characters, and must be at least a minimum length, by default six characters.

(To change the default minimum length, see the SET USER command in the

Operations chapter in the Software Reference.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR450S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allied Telesis AR450S Manual

Product: