541399
119
Zoom out
Zoom in
Previous page
1/134
Next page
Routing 119
Software Release 2.7.1
C613-02021-00 REV F
Routing Information Protocol (RIP)
The Routing Information Protocol (RIP) is a distance vector protocol that is part
of the TCP/IP protocol suite used to exchange routing information between
routers. RIP determines a route based on the smallest hop count between
source and destination.
Routing protocols such as RIPv1 and RIPv2 can be enabled on a VLAN. To
enable RIPv2 on the admin VLAN, enter the command:
ADD IP RIP INTERFACE=vlan11 SEND=RIP2 RECEIVE=BOTH
To display information about RIP (Figure 20 on page 119), enter the command:
SHOW IP RIP
Figure 20: Example output from the SHOW IP RIP command.
To interpret output from the SHOW IP RIP command see the Internet Protocol
(IP) chapter in the Software Reference.
Resource Reservation Protocol (RSVP)
The Resource Reservation Protocol (RSVP) is a signalling protocol designed to
reserve bandwidth for realtime transmission. RSVP is not a traffic delivery
protocol or a routing protocol. RSVP does not deliver the application’s traffic to
its destination or manage the routing of the data packets; this is left to existing
transport and routing protocols.
RSVP enables the receiver of a traffic flow to make the resource reservations
necessary to ensure that the receiver obtains the desired Quality of Service
(QoS) for the traffic flow.
RSVP is disabled by default. To enable RSVP, enter the command:
ENABLE RSVP
Each IP interface that is to receive and process RSVP messages and accept
reservation requests must be enabled. To enable RSVP on the admin VLAN,
enter the command:
ENABLE RSVP INTERFACE=vlan11
To display information about the interfaces enabled for RSVP (Figure 21 on
page 120), enter the command:
SHOW RSVP INTERFACE
Interface Circuit/DLCI IP Address Send Receive Demand Auth Password
-------------------------------------------------------------------------------
vlan11 - - RIP2 BOTH NO NO
ppp0 - 172.16.249.34 RIP1 RIP2 YES PASS ********
-------------------------------------------------------------------------------
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR440S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR440S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info