541399
113
Zoom out
Zoom in
Previous page
1/134
Next page
Routing 113
Software Release 2.7.1
C613-02021-00 REV F
To configure IPX follow these steps
The following steps are required:
1. Configure the PPP link.
2. Configure the routers for IPX.
3. Test the configuration.
4. Save the configuration.
1. Configure the PPP Link
Refer to other sections of this guide on how to configure PPP interface 0 on
each router to use the wide area link.
See “Point to Point Protocol (PPP)” on page 81 for information about
configuring PPP to use a synchronous link.
See “Configuring ISDN (models with PIC bay)” on page 87 for information
about configuring PPP to use an ISDN call.
If the PPP interface is configured for dial-on-demand operation
(see“Configuring ISDN Dial on Demand” on page 92) or bandwidth on
demand operation (see “Configuring ISDN Bandwidth on Demand” on
page 93), these services are automatically used by the IPX routing
software.
2. Configure IPX Routing
To purge the IPX static database to clear any pre-existing IPX configuration
and enable the IPX routing software on each router, enter the commands:
PURGE IPX
ENABLE IPX
On the Head Office router define two IPX circuits, one for the Ethernet
interface and one for the wide area link, by entering the commands:
ADD IPX CIRC=1 INT=ETH0 NETW=401 ENCAP=802.3
ADD IPX CIRC=2 INT=PPP0 NETW=129
To repeat this procedure on the Remote Office router, defining one IPX
circuit for the Ethernet interface and one for the wide area link, enter the
commands:
ADD IPX CIRC=1 INT=ETH0 NETW=12 ENCAP=802.3
ADD IPX CIRC=2 INT=PPP0 NETW=129
The routers are now configured for IPX and can exchange routes and service
information.
3. Test the Configuration
To examine the route table and service table on each router, enter the
commands:
SHOW IPX ROUTE
SHOW IPX SERVICE
The route table will contain paths from each Novell device which advertises
routes, for example file servers and routers. The service table lists all the
services, such as file services and print services, that devices are advertising.
The actual contents of the route table varies with the number and type of file servers
present on the network. A route from each router to the other, and all services shown as
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR440S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR440S in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info