Manual Allied Telesis AR415S (page 10 of 54) (English)

541405

Zoom out

Zoom in

1/54

Installation and Safety Guide 9

613-000313 Rev D

Configuring the AR415S

You can configure the router via the command line interface (CLI) or the graphical

user interface (GUI). First use the CLI to assign an IP address to the router, then use

the CLI or the GUI to complete the configuration.

■ “Using the CLI to configure the AR415S” below

■ “Using the GUI to configure the AR415S” on page 11

Using the CLI to configure the AR415S

This section describes how to access the router’s command line interface (CLI)

using a terminal or PC connected to the router’s console port.

1. Initiate router start-up.

Using the terminal cable supplied, connect a VT100-compatible terminal, or the

COM port of a PC running a terminal emulation program such as Windows

Hyper Terminal, to the Console RS-232 (ASYN0) port on the router’s rear

panel.

Set the communication parameters on your terminal or terminal emulation

program to:

• Baud rate: 9600

• Data bits: 8

•Parity: None

• Stop bits: 1

• Flow control: Hardware

See the AR400 Series Router Hardware Reference for more information on

configuring emulation software.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR415S in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Allied Telesis AR415S Manual

Product: