541398
125
Zoom out
Zoom in
Previous page
1/134
Next page
Maintenance and Troubleshooting 125
Software Release 2.7.1
C613-02021-00 REV F
When you start the router the FLASH boot release is always loaded first. The
FLASH boot release contains all the code required to obtain and check the
INSTALL information. This first boot is known as the INSTALL boot. The
INSTALL information is inspected and the router is setup to perform another
load. Even if the actual release required is the FLASH boot release, another
load is always performed. At this point, if a patch load is required, it is also
performed.
The router startup occurs immediately after the install override option, or after
the INSTALL information check. The INSTALL information check performs a
full startup of router software and initiates the normal operation of the router.
Finally, if there is a defined boot script, this script is executed.
How to Avoid Problems
If you perform the following procedures you may help reduce the likelihood
and impact of some future router events.
Set system territory
Set the system territory to the country or region in which the router is
connected to the network. Some protocols are implemented in differently in
some countries. To ensure that the router uses variants that will work in the
country your router is routing in, enter the command:
SET SYSTEM TERRITORY={AUSTRALIA|CHINA|EUROPE|JAPAN|KOREA|
NEWZEALAND|USA}
Backup software files
Store a backup of the current router software. If the router software is
accidentally cleared from the router’s FLASH memory, you will need to reload
the software release and patch files. If your access to the Internet is via the
router, then you will need the files on your LAN. You may wish to keep a copy
of the current software and patch files on a TFTP server on your network. You
can download router software from the website at
http://www.alliedtelesyn.co.nz/support/ar400
.
Backup configuration script
Store a backup of the latest configuration script, in case the configuration file
on the router is accidentally deleted or damaged.
Backup router
If your network has many routers, you may wish to keep a backup router
ready to replace any router that malfunctions. When you upgrade the software
release or patch on the other routers in the network, upgrade the backup too.
Store on it one current config script for each router in your network, so that
when it is needed, you need only set the configuration file with which it boots
to match the router it replaces.
125


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR410 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info