541398
111
Zoom out
Zoom in
Previous page
1/134
Next page
Routing 111
Software Release 2.7.1
C613-02021-00 REV F
Configuring a Novell IPX Network
The router’s implementation of the Novell IPX protocol uses the term circuit to
refer to a logical connection over an interface, similar to an X.25 permanent
virtual circuit (PVC) or a Frame Relay Data Link Connection (DLC). The term
interface refers to the underlying physical interface, such as VLAN, Ethernet,
Point-to-Point (PPP) and Frame Relay.
Before You Start
1. Collect the information that you will need to configure IPX. Pay particular
attention to the following points:
Each network in a Novell internet, including all LANs and WAN links,
must be assigned a network number. Novell file servers also have an
internal network number. These network numbers must be unique
across the Novell internet—no two networks or file servers may use the
same network number. All devices attached to a network must use the
same network number to refer to the network. Check to see what
numbers your file servers are using. Many schemes exist to ensure that
numbers are kept unique, for example, using the hexadecimal
representation of the IP address or the telephone number of each
location.
All routers, file servers and workstations attached to an Ethernet LAN
must use the same Ethernet encapsulation or frame type. Table 12 on
page 111 lists the Novell frame type and the equivalent AR400 router
encapsulation. You can determine the file server name, internal
network number, Ethernet frame type and Ethernet network number
used by a Novell file server, by interrogating the file server itself. From
the management console attached to the Novell file server, at the system
console prompt type the command “config” and record the values of
the fields “File server name”, “IPX internal network number”, “Frame
type” and “LAN protocol”. You can also access the system console by
running the console utility from any workstation logged in as
supervisor. For more details, contact your local Novell network
administrator or refer to the Novell documentation.
2. Ensure that the routers you want to configure are connected as described in
the Quick Install Guide.
3. Connect a terminal to the console port (port 0) on each router as described
in the in the Quick Install Guide. Alternatively, you can connect a PC to the
console port and use a terminal emulation program like Windows™
Terminal.
4. Login to the MANAGER account on each router. (see “Logging In” on
page 15)
Table 12: Frame type and equivalent router encapsulation.
Novell Frame Type Router Encapsulation
Ethernet_802.3 802.3
Ethernet_802.2 802.2
Ethernet_II EthII
Ethernet_SNAP SNAP
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR410 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info