541398
15
Zoom out
Zoom in
Previous page
1/134
Next page
Getting Started with the Command Line Interface (CLI) 15
Software Release 2.7.1
C613-02021-00 REV F
If a modem is connected, configure the router to make and/or accept calls via
the modem. To set the CDCONTROL parameter to “CONNECT” and the
FLOW parameter to “HARDWARE”, enter the command:
SET ASYN CDCONTROL=CONNECT FLOW=HARDWARE
If the terminal or modem is used with communications settings other than the
default settings, then configure the asynchronous port to match the terminal or
modem settings using the SET ASYN command.
See the router’s online help or the Interfaces chapter in the Software Reference
for more information on how to configure the asynchronous port.
Logging In
When you access the router from a terminal or PC connected to the RS-232
terminal port (asyn0), or via a Telnet or HTTP connection, you must enter a
login name and password to gain access to the command prompt. When the
router is supplied, it has a manager account with an initial password friend.
Enter your login name at the login prompt:
login: manager
Enter the password at the password prompt:
password: friend
After you log into the manager account you can enter commands from this
document and from the Software Reference.
Assigning an IP Address
To configure the router to perform IP routing (for example, to access the
Internet) you need to configure IP. You also need to configure IP if you want to
manage the router from a Telnet session or with the GUI. For detailed
instructions on accessing the router with the GUI, see “Accessing the Router via
the GUI” on page 24.
Some router models are preloaded with a basic IP configuration, including an
IP address. To check your router’s configuration, use the command:
SHOW CONF DYN
To configure IP, first enable it, using the command:
ENABLE IP
Then, add an IP address to each of the router interfaces that you want to
process IP traffic. Depending on the router model, these may include:
the default VLAN (vlan1)
the DMZ (vlan2, which contains port 3, on the AR410 and AR410S; eth1 on
the AR450S)
the WAN Ethernet port (eth0).
For the default VLAN, use the command:
ADD IP INTERFACE=vlan1 IPADDRESS=ipadd MASK=mask
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allied Telesis AR410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allied Telesis AR410 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info