541370
32
Zoom out
Zoom in
Previous page
1/36
Next page
Allen & Heath 32 ZED-4 BUS User Guide
USING USB FOR EFFECTS
1
4
5
6
7
8
1
2
3
4
5
6
7
8
9
Use post fade Aux 5 & 6 as the sends from ZED so when you move the channel
fader the effects level stays in proportion.
Select Aux 5-6 on the USB output selector switches.
USB lead carries the digital signals to & from the computer.
Select USB Device Left for Aux 3 or Right for Aux 4 as the input for the track in
the software package.
You can use a send bus in software as you would a hardware mixer.
Assign an effect from your software plug-in list.
If using reverb, it’s a good idea to have 100% wet mix level and reduce the pre-
delay in order to compensate for any latency in USB.
Send the output of the software group or bus to USB Device. In this case, and
probably with most reverbs, it will be stereo so it will go to left & right.
Set the USB return to be sent to ST3. It can then be sent directly to LR or to the
stereo channel by pressing in the under-panel switch below the ST3 Level control.
USB
SENDRETURN
MTX
1-2
AUX
1-2
AUX
5-6
LR
pre-fade
All up =LR post
OO
+6
PLAYBACK
To LR
ALLEN&HEATH
USB
2TRK
PLAYBACK SOURCE
LEVEL
PLAYBACK
PFL
USB SEND SOURCE
ST3 INPUT SOURCE
USB
ST3 IN
+6
+6
AUX5
POST
+6
AUX6
POST
PRE
POST
OO
OO
OO
2
3
9
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ZED420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ZED420 in the language / languages: English as an attachment in your email.

The manual is 6,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info