541370
19
Zoom out
Zoom in
Previous page
1/36
Next page
Allen & Heath 19 ZED-4 BUS User Guide
STEREO INPUT CHANNEL
2
4
1
ST1 (& ST3) Phono sockets
These are stereo inputs additional to the main stereo channel in-
puts (below). The gain is varied by the ST1 (& ST3) level control
and these inputs can be sent to either the stereo channels or
straight to the L R main bus, depending on the setting of the under-
panel switch. These inputs are unbalanced.
The source for the ST3 input can be switched from the phono
sockets to the USB return signal with the selector switch below the
USB socket
.
1
5
3
2
Stereo Inputs 1 (& 3) Level control
Adjust the level of the stereo inputs 1 & 3 from off (fully attenu-
ated) to maximum where it has 10dB of gain.
3
4
5
ST1 (& 3) Routing selector switch
This switch selects whether the ST1 (or ST3) signal is sent to the L
R bus directly, or the stereo channel below. When it is pressed in,
the ST1 (or ST3) signal sums together with the main stereo inputs
ST2 (or ST4).
ST2 (& ST4) input jack sockets
Standard 1/4” jack sockets for line level stereo signals. Can be used
with a mono input where the L/M input will also connect to the R
input if nothing is plugged in to R.
The Stereo 1 inputs accept unbalanced or balanced signals.
Stereo Input ST2 (& ST4) Level control
Adjusts the level of the ST2 (& ST4) input. The range is from off to
+10dB.
10
-30
-20
-5
0
5
-10
ST1
LEV
OO
10
-30
-20
-5
0
5
-10
OO
To LR
To CH
ST1
IN
R
ST2
L/M
R
ST2
LEV
IN
L
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ZED420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ZED420 in the language / languages: English as an attachment in your email.

The manual is 6,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info