541354
16
Zoom out
Zoom in
Previous page
1/32
Next page
Allen & Heath 16 ZED-14, 18 & 24 User Guide
MONO INPUT CHANNEL
Auxes 1 & 2
Each of these controls sends a signal to an auxiliary bus. The signal is
sourced pre-fade which means that the level is independent of, and unaf-
fected by the fader. Auxes 1 & 2 are primarily used for foldback monitoring
purposes, as the fader does not affect the level. They can also be used as
feeds for recording and are available sources to the USB interface for this
purpose.
These sends are affected by the Mute switch, so muting the channel will also
mute the Aux sends.
The control varies the signal level to the bus from off (fully attenuated) to
+6dB, with unity gain at the arrow.
There are master level controls for the Aux 1 & 2 outputs situated in the
master section of the mixer.
Auxes 3 & 4
These are post-fade sends, which means that the signals are affected by the
channel fader. Primarily used for effects sends, the aux signal will reduce if
the fader is pulled down so keeping the correct proportion of the effect.
Muting the channel will also mute the Aux sends, and the send controls have
6dB gain fully clockwise.
There are no master level controls for Aux 3 & 4 outputs.
PAN
The pan control adjusts how the signal from the mono input channel is
shared between the left and right buses and subsequently the main stereo
outputs. Set to the mid position, equal amounts of signal are fed to left and
right, with pan set to L, none is sent to the Right bus.
PFL Switch & PK! LED
The PFL (Pre-Fade Listen) switch sends the channel signal to the PFL bus
and subsequently to the headphones and the main L R meters. Used for
checking the audio signal before raising the fader or un-muting the channel.
The PK! LED illuminates dimly to indicate the PFL switch is pressed, and
brightly to indicate the channel signal is within 5dB of clipping.
Mute Switch
This mutes or cuts the signal to the left & right buses and the Aux buses. A
rectangular LED illuminates to show the Mute switch is pressed.
Fader
The 100mm fader affects the level of the channel signal to the left & right
buses and Auxes 3 & 4. There is 10dB of gain at the top and the unity gain
position is marked by “0”.
OO
30
5
10
20
5
0
10
OO +6
AUX1
PRE
OO +6
AUX2
PRE
OO +6
AUX3
OO +6
AUX4
POST
LR
PAN
=
PK !
PFL
MUTE
1
POST
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ZED18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ZED18 in the language / languages: English as an attachment in your email.

The manual is 16,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info