541364

Allen-Heath ZED SIXTY-10FX Manual

29
Zoom out
Zoom in
Previous page
1/36
Next page
Allen & Heath 29 ZED Sixty 10FX & 14FX User Guide
CONNECTING A ZED TO PRO TOOLS 9(& UP) ON A MAC
1. Connect your ZED mixer to your Mac via USB and power on the mixer.
2. With Pro Tools (PT) installed, open Audio MIDI Setup on your Mac. PT should have created a Pro Tools
Aggregate I/O folder in the Audio Devices list. The ZED interface should appear as USB Audio CODEC
in the list along with other audio devices in your system. Tick Use to enable the device in PT.
6. Select the inputs and outputs for your tracks in your
session. Here the input for mono Track 1 is selected as
the Left channel from the ZED USB interface. The track
outputs can either be routed to the ZED directly or to a
master bus in Pro Tools and then to the ZED. Be wary of
possible feedback loops when setting the routing to the
tracks and then back to the ZED.
5. In I/O Setup, click the Input tab. The input sources appear
for enabled devices in Pro Tools Aggregate I/O. Create a
new path for the inputs and name as you prefer. Note
that mono channels can use one channel of a stereo input
path. Make sure the path is ticked and click OK.
4. In PT click SETUP and then I/O. Select Output from the menu
and the devices available should appear in a box labelled PTAI/O
(Pro Tools Aggregate I/O). Here you can create a new output
path if one doesn’t exist, name it (here it’s called ZED Stereo
OUT) and tick it to enable.
3. Run Pro Tools and create a new session with at least two
audio tracks. Open the SETUP/Playback Engine window and
select Pro Tools Aggregate I/O as the Current Engine. Click
OK.
Audio MIDI Setup...
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ZED SIXTY-10FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ZED SIXTY-10FX in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info