541364

Allen-Heath ZED SIXTY-10FX Manual

23
Zoom out
Zoom in
Previous page
1/36
Next page
Allen & Heath 23 ZED Sixty 10FX & 14FX User Guide
ZED-FX EFFECTS PROCESSOR
Effects Type List & Description.
There are 16 different effects presets in the ZED Effects Processor. Each is fed with a mono
signal from the FX bus, and the output from the effects processor is in stereo.
Each preset has a parameter adjust control which is matched to the preset. This control may
morph several parameters all at once, for example the parameter control for the Chorus
effect will adjust not only the depth, but the response of the filters in software to create a
more or less intense effect. In general, when adjusting the effect parameter, the more LED’s
that are illuminated, the more intense the effect or higher the parameter value.
To restore the parameter settings to the factory defaults, hold down both SEL buttons whilst
switching on the power to your ZED.
Effect Preset Name Effect Description & Parameter adjustment.
1 Dly+verb(level) Delay with Reverb. Delay feeds reverb (Classic Plate).
TAP for delay time Min = 70mS Max = 1.35S, Adjust the level of reverb.
2 Dly+verb(size) Delay with Reverb. Delay feeds reverb (Classic Plate). TAP for delay time
Min = Min = 70mS Max = 1.35S, PARAMETER Adjusts the size of reverb.
3 Dly+verb(regen) Delay with Reverb. Delay feeds reverb (Classic Plate). TAP for delay time
Min = 70mS Max = 1.35S, PARAMETER adjusts the regeneration of the delay.
4 PingPong(regen) Ping Pong delay (left then right) in parallel with Plate reverb. TAP for left delay time
Min = 70mS Max = 1.35S, PARAMETER adjusts the delay regeneration.
5 BeatDly(regen) As (4) but right delay is set for 1/4 beat of left. Good for off beat 4/4 delay sound.
TAP for left delay time & PARAMETER adjusts the delay regeneration.
6 Ambient(echo) Echo Delay with Reverb. PARAMETER adjusts the echo time.
7 SlapVerb(size) Reverb with echo reflections creating classic slapback reverb sound.
PARAMETER adjusts the slapback size (more slap echo).
8 DoubleZED(size) Classic stereo doubler.
PARAMETER adjusts delay and size.
9 Plate(decay) Classic plate reverb. PARAMETER adjusts decay time.
10 Plate(predly) Plate reverb with pre-delay. Good for vocals/percussion.
PARAMETER adjusts pre-delay time (for increased intelligibility).
11 Plate(colour) Classic plate reverb. PARAMETER adjusts tonal texture from dark to bright.
12 Hall1(size) Smooth classic hall reverb. PARAMETER adjusts size of hall.
13 Hall2(size) Brighter hall reverb. PARAMETER adjusts size of hall.
14 Arena(size) Arena reverb. PARAMETER adjusts size of arena.
15 Flanger(dpth) Classic flanger effect. PARAMETER adjusts depth and tonality.
16 Chorus(dpth) Chorus effect. PARAMETER adjusts depth and tonality.
Effects Type Table with description.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ZED SIXTY-10FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ZED SIXTY-10FX in the language / languages: English as an attachment in your email.

The manual is 10,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info