541369
25
Zoom out
Zoom in
Previous page
1/44
Next page
Allen & Heath 25 XONE:DB4 User Guide
SETUP MENU
RECORD SETUP
Trim: Sets the signal level of the analogue record outputs and the Digital
Output. 0.0dB corresponds to a nominal output level of +4dBu when the
main meters read 0VU. This is an ideal level to feed power amplifiers or in-
terface with pro audio equipment, but is too high for most recording devices,
(minidiscs etc) so use this control to attenuate the output level by up to
40dB.
Source: There are three options available; Mix, Cleanfeed, or Phones. Mix
will send the same signal to the record out as to the main mixer outputs,
Cleanfeed will send the Mix output less the signal from the Mic channel, and
Phones will send the headphone monitor signal. The Digital output will also
be affected by any routing changes made here.
BOOTH SETUP
Trim: Sets the signal level of the Booth outputs. 0.0dB corresponds to a
nominal output level of +4dBu when the main meters read 0vU. This is an
ideal level to feed power amplifiers or interface with pro audio equipment. If
the Booth level is too high, it can be attenuated by up to 40dB.
Phase: Allows you to reverse the signal Phase of the Booth output. The
DB4 is phase coherent, i.e. the signal phase of the output is the same as the
input, however in some installations acoustic reflections can create a phase
cancellation between the booth monitors and the main PA. This often results
in loss of bass frequencies, so try reversing the Booth phase to see if it im-
proves the fidelity of the system.
Source: There are three options available, Mix, Cleanfeed, or Phones. Mix
will send the same signal to the record out as to the main mixer outputs,
Cleanfeed will send the Mix output less the signal from the Mic channel, and
Phones will send the headphone monitor signal.
MIX SETUP
Trim: Sets the signal level of the Main Mix outputs. 0.0dB corresponds to a
nominal output level of +4dBu when the main meters read 0vU. This is an
ideal level to feed power amplifiers or interface with pro audio equipment. If
the Mix level is too high, it can be attenuated by up to 40dB.
Phase: Allows you to reverse the individual left/right signal Phase of the
Main Mix outputs. This control can also be used as a temporary fix for
wrongly wired balanced cables or speaker systems
Normal means that the mixer is Phase coherent, i.e. the output signal is the
same phase as the input.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath Xone DB4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone DB4 in the language / languages: English as an attachment in your email.

The manual is 10,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info