541369
21
Zoom out
Zoom in
Previous page
1/44
Next page
Allen & Heath 21 XONE:DB4 User Guide
BPM / mS MODE
The delay time defaults to fractions of the detected BPM, set by the FX TIME encoder, however it is
possible to manually set the delay time in milliseconds by switching to mS MODE. To do this press and
hold the effect DLY button, and at the same time press the FX TIME encoder. The display will switch
from the current beat fraction to show that time in milliseconds. Rotating the FX TIME encoder will
increase or decrease the time in milliseconds, at the same time the beat fraction display will change to
show the nearest equivalent fraction.
KILL SEND EFFECTS
All Delays and Reverbs can be set to “Kill Send” mode. In this mode, rotating the Wet/Dry control
into the orange area labelled KS” will mute the send to the effects unit, leaving only the processed
output to decay into the mix. This can be used as a dramatic way to mix into a new track, or as an
entry to a breakdown.
KILL SEND AND BPM/mS MODE
KILL SEND INTERLOCK
When an effect is in kill send mode and the Wet/Dry control turned fully clockwise, the effect ON/OFF
button changes colour from Green to Orange, and the effected signal decays into the mix. If the FX is
turned OFF the button will change colour to RED to warn that the safety interlock is active. The FX
cannot be turned back ON until the Wet/Dry control is moved away from the KS area. Without the
safety interlock, turning the FX back ON would result in silence as the audio send to the FX processor
has been muted (killed).
Kill Send (KS) area
SWITCHING EFFECTS TO
KILL SEND MODE
To switch the Reverbs or Delays
to Kill Send mode, hold down the
effect button, and at the same
time press the FX ADJ encoder.
The display will show when kill
send is active with a small “ks”
above the beat fraction.
DLY
VRB
RES
MOD
DMG
Whilst adjusting the delay time in milliseconds, the beat
fraction will increase or decrease accordingly. This is rep-
resented by the fraction numbers shifting along the frac-
tion dividing line.
When switching back to BPM from mS mode, the tempo
will snap to the nearest beat fraction.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath Xone DB4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone DB4 in the language / languages: English as an attachment in your email.

The manual is 10,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info