541350

Allen-Heath Xone 92 Manual

18
Zoom out
Zoom in
Previous page
1/40
Next page
18 XONE:92 User Guide
MIC/RETURN Input Channel
These controls adjust the level and tone of each source before they are mixed. Two input channels are provided.
Each has two inputs. MIC/RETURN channels 1 and 2 are used for microphone or alternative stereo line source.
They provide corrective source equalisation.
1 AUX 1-2 sends. Adjust the levels of the
channel signals to the stereo Aux outputs. Turn
fully anticlockwise to turn the signal off, fully
clockwise for a maximum +6dB boost.
2 PRE switches. With the switch in its up
position the signal to the Aux mix is sourced post-
fader. This means that the Aux send follows the
channel fader movements. Press the switch to
source the send pre-fader. Set in this way the fader
has no affect on the Aux level.
Post-fade sends are typically used to send channel
signals to effects devices such as reverb
processors. The amount of signal sent to the device
follows the fader level. The processed (wet) signal
returned to the mix elsewhere is therefore in
proportion to the direct (dry) signal regardless of
fader position. This could, for example, be used to
add ambience to the DJ or guest vocal mic.
Other post-fade uses include special recording or
zone feeds.
Pre-fade sends are typically used for DJ effects or
to feed monitor speakers such as stage foldback.
Here, it is important that fader changes made to
balance the house mix do not affect the monitor
levels.
When working with a sampler effects device you
could use either post or pre setting. If you wish to
cue the sampler effect before raising the source
fader into the mix then set it pre-fade. Use the
sampler return channel fader to bring up or remove
the effect from the mix.
☺ You can use the Aux mix to cue your music
when beat or cut mixing. Set all sends pre-fade and
select the headphones monitor AUX switch to listen
to the selected channels. This lets you listen to the
effect of mixing the sources or matching the beat
before you bring it into the house mix.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath Xone 92 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone 92 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info