541361
39
Zoom out
Zoom in
Previous page
1/48
Next page
Allen & Heath 39 XONE:4D User Guide
MIDI CONTROL SECTION
MIDI Messages
The diagram below shows which controls are associated with MIDI CC (continuous controller)
and note on/off messages. These controls send the MIDI messages shown when operated. The
switch light ring indicators (except for start/stop and tap tempo) may be turned on or off by
incoming MIDI messages.
MIDI Channel Number and Map
To change the MIDI map and channel number, please refer to the MIDI CHANNEL, MAP AND
LIGHT PIPE SETUP sections on pages 11 and 12.
MIDI Shift Mode
All of the controls on the Xone:4D (with the exception of the crossfader, can be mapped a
second time using the MIDI shift mode. To enter MIDI SHIFT MODE, hold down the encoder
above the jog wheel on the left MIDI pod for approximately half a second. The BPM display will
show SFT when the console is in shift mode. A fader pick up algorithm has been written into
the software to ensure seamless integration between the two MIDI layers. In shift mode, the
channel MIDI messages are sent on the default MIDI channel minus 1—i.e. if you are transmitting
on MIDI channel 16 then shift mode will transmit on channel 15. The only exception is if the
default channel is channel 1 then the shift mode will transmit on channel 2.
A
B C D
E
F G H
I
J
K
L
M
N
O
P
Q
R S
T
U
V W
X
CC32 CC33 CC34 CC35
E0 D-1
E-1 D0
F5 F#5 G5 G#5 A5 A#5 B6 C6
CC9 CC11 CC13 CC15
CC8 CC10 CC12 CC14
CC19 CC18 CC17 CC16
D#-1 D#0 F0 F-1
C1 A-1 F#-1
G#0
C#1
A#-1 G-1
A0
C0
CC36
CC37
A#2
A-2
B-2
C#-1
CC40 CC41 CC42 CC43
C3 A#1
C2 A#2
C#6 D6 D#6 E6 F6 F#6 G6 G#6
CC21 CC23 CC25 CC27
CC20 CC22 CC24 CC26
CC31 CC30 CC29 CC28
B1 B2 C#3
C#2
G#3 F2 D2
E3
A3 F#2 D#2
F3
G#2
CC44
CC45
F#1
F1
G1
A1
C4 C#4 D4 D#4
D#5
C#5
D5
CC7
A4
CC5
C5
A#4
B4
CC6
G#4
FOOTSWITCH CC4 - DOWN = 127, UP = 0
JOYSTICK X = CC3 - LEFT = 127, RIGHT = 0 Y = CC1 - UP = 127, DOWN = 0 FINGER BUTTON = C#-2 THUMB BUTTON = D-2
MAP 1
MAP 2
MAP 1
MAP 2
A#3
G2
E2
F#3 D1 B-1
G#-1 A#0
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath Xone 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone 4D in the language / languages: English as an attachment in your email.

The manual is 3,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Allen-Heath Xone 4D

Allen-Heath Xone 4D User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info