541376
17
Zoom out
Zoom in
Previous page
1/24
Next page
17
No sound from mixer
Check that the unit is powered on, and that an audio signal is connected
to a channel input.
Check that the PHONO/LINE switch is in the correct position for the
type of music source connected, (PHONO for turntables, LINE for CD
players.
Check that the EQ controls are in the centre position.
Raise the input channel LEVEL control until you see the meters
displaying the music signal (also check that the CUE/MASTER button is
up).
Raise the channel fader, and ensure that the crossfader is towards the
channel that is receiving the audio signal.
Raise the level of the MASTER, MONITOR or HEADPHONE level
controls depending on what output your amplifier is connected to, or if
you are monitoring through headphones.
If the FILTER/FXLOOP switch is on, check that the FXLOOP ON switch
(above the MASTER level control) is up.
External effects unit can’t be heard
Check that it is connected correctly and switched on; FX LOOP SND
on the rear panel of the mixer should be connected to the input socket
on the external effects unit, and the output from the effects unit should
be connected to the FX LOOP RTN.
Check that the FXLOOP switch is on (pressed down), and that the
FILTER/FXLOOP switch below the channel fader is ON.
Signal is loud and distorted
Check that the audio source is connected to the correct input; i.e. don’t
connect a CD player to the PHONO input.
Adjust the channel input LEVEL so that the Channel meters peak the +3
or +6 LEDs. If the red LED comes on, turn down the channel LEVEL
control.
FAULT FINDING
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath Xone 22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath Xone 22 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info