541358
27
Zoom out
Zoom in
Previous page
1/40
Next page
Allen & Heath 27 XB-14 User Guide
ON ON ON ON ON ON ON ON ON ON ON ON
DISABLE ON SWITCHES
MONO INPUTS
1234
(MAKE PERMANENTLY ON)
T1 T2 1 2 3 4
STEREO INPUTS
LEDs FOLLOW SWITCH
DISABLE STEREO
MUTE CIRCUIT (JAM ON)
BUT
(LED'S ALWAYS ON)
ON ALL 4 STEREO CHs
REMOTE INTERFACE CONNECTORS
External Meter socket
This can be used to feed the main Program PGM L & R signals to external metering equipment. These are line level
analogue signals, the level at 0VU will be 0dBu.
+/- 15V power is also available to power meter circuits, current draw should be kept under 100mA or so.
9 Way D socket connector EXTERNAL METER
PIN FUNCTION
1 +15V POWER
2 -15V POWER
3 GROUND
4 LEFT METER
5 RIGHT METER
6 GROUND
7 GROUND
8 GROUND
9 +10V POWER
Configuration Switches
The tiny slide switches accessible on the rear panel are for configuring the XB-14’s channel ON switches. In the up position,
the channel ON switch will act as a normal ON/OFF switch affecting the channel signal accordingly. If the slide switch is moved
down to the “ON” position, then the corresponding channel’s ON switch will be disabled (made so that it is jammed ON).
The green LEDs in the switch will then permanently illuminate. UNLESS….
Unless you are using the Stereo channel ON switches for transport Start/Cue and would like the channel mute circuit disabled
but the switch illumination still to follow the switch position. In this case use the last switch in the row to disable the mute
circuit on all 4 stereo channels, but make the illumination follow the switch position.
If you want, you can disable the Stereo channel mute circuit on an individual channel basis using the Stereo Inputs 1,2,3 & 4
slide switches individually. This will make the channel permanently on and the switch illumination also permanently on.
This may seem like a fussy complication, but could be useful if you want to revert to basic operation, where only the faders
control the signal going out on air, disabling the ON switches so the operator cannot turn off the channel accidentally, but still
want the switch illumination on certain stereo channels to follow the Start/Cue on the CD player or deck.
ALSO SEE P21 FOR A DIAGRAM TO EXPLAIN THESE SETTINGS.
ON SWITCH OPTIONS
STANDARD OPERATION
OPTIONAL OPERATION
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath XB-14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath XB-14 in the language / languages: English as an attachment in your email.

The manual is 4,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info